584,849 active members*
3,889 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2006
    Posts
    52

    Phase mode without controller

    I know directly that driving motors in phase mode withoun controller is possible in TurboCNC. May be someуbody know how to do it? My motors is unipolar, 0.5A. If I connect it with ising 4 wires of 6 (2 not used) it will be 3*4=12 pin lpt.
    How to connect a power supply so that the computer has not burned down?

  2. #2
    Join Date
    May 2006
    Posts
    47

    late answer ..

    look at this link .. not in english, but with pictures ...

    http://www.cnc.info.pl/topics46/turb...owe-vt3067.htm

Similar Threads

  1. Can I convert single phase motor to three phase?
    By Jim Estes in forum Phase Converters
    Replies: 34
    Last Post: 06-04-2020, 02:52 PM
  2. Phase definition for SMC 800 controller
    By Magnar in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 5
    Last Post: 04-04-2006, 01:17 PM
  3. 3-phase stepper controller
    By extreme in forum Open Source Controller Boards
    Replies: 0
    Last Post: 06-20-2005, 04:03 PM
  4. 3 phase transformer on single phase?
    By jevs in forum CNC Machine Related Electronics
    Replies: 4
    Last Post: 03-19-2005, 06:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •