I have just about completed the build of a new machine. I am using a NVEM Ethernet controller and Mach3. It is all working except for soft limits. After homing and all machine co-ords are at zero I can turn soft limits on and not a problem, but when I select work co-ords mach3 generates a limit alarm.
After many hours of testing I have come to the conclusion that the most likely cause is a problem with the driver NVEM.dll. The version I have is 4.0.0.1
Tracking down the manufacturer on internet is a bit of a problem.
I am looking for different versions of the driver to test it. does anyone out there have a different driver version