584,800 active members*
4,518 visitors online*
Register for free
Login
IndustryArena Forum > OpenSource CNC Design Center > Arduino > Russian Arduino Lead Screw Project??
Page 7 of 7 567
Results 121 to 128 of 128
  1. #121
    Join Date
    Jun 2019
    Posts
    16

    Re: Russian Arduino Lead Screw Project??

    Hi thank you for your reply I may need to revert back to older version if I cant get information...many thanks though

  2. #122
    Join Date
    Jun 2017
    Posts
    32

    Re: Russian Arduino Lead Screw Project??

    If you have trouble getting what you need, let me know and I'll go onto chipmaker and ask.

  3. #123
    Join Date
    Jun 2019
    Posts
    16

    Re: Russian Arduino Lead Screw Project??

    Quote Originally Posted by bowcoastie View Post
    If you have trouble getting what you need, let me know and I'll go onto chipmaker and ask.
    Hi that's very kind of you. First is there any difference between the standard prototype and Nicholai67's board. Second I am using a standard type rotary encoder square wave do I need to short out where indicated. Little confused on this note posted earlier ..see pic

  4. #124
    Join Date
    Nov 2006
    Posts
    78

    Re: Russian Arduino Lead Screw Project??

    Hiya Stroheim, Yep , solder the jumpers. Nicholai 67 is better than the Oil Major's, if that's what U mean, cos it is the same format as the Mega.(physical shape).
    The hand encoder is wired to the relevant plug/socket on the board, the Spindle encoder is wired to the input U referred to, the links soldered will transfer the quadrature signals to the Arduino Mega.

  5. #125
    Join Date
    Jun 2019
    Posts
    16

    Re: Russian Arduino Lead Screw Project??

    Quote Originally Posted by qtronpowerson View Post
    Hiya Stroheim, Yep , solder the jumpers. Nicholai 67 is better than the Oil Major's, if that's what U mean, cos it is the same format as the Mega.(physical shape).
    The hand encoder is wired to the relevant plug/socket on the board, the Spindle encoder is wired to the input U referred to, the links soldered will transfer the quadrature signals to the Arduino Mega.
    Hi thank you for replying. I have built the system but I have no LCD readout and several functions don't work. I have double checked all my wiring and seems ok. I suspect its because i am using the standard prototype board see pic and I should be using the Nicholai 67 board and I need to source one of them

  6. #126
    Join Date
    Nov 2006
    Posts
    78

    Re: Russian Arduino Lead Screw Project??

    Hiya Stroheim,
    technically it shouldn't matter which breakout board is used, but the Nicholai 67 breakout adapter makes it fairly fool-proof.
    And, U get the luxury job of crimping all those JST pins onto your loom wires! The appropriate too is required for that.
    Without seeing exactly what U have done its hard to advise..
    JLCPCB.COM in china can make the Nicholai 67 cheaply, but bear in mind those JST's. Of course U could simply sider the wires directly to the PCB
    just "reorder " from my attached file reference- should work.
    Cheers, stay safe.

  7. #127
    Join Date
    Jul 2003
    Posts
    6

    Re: Russian Arduino Lead Screw Project??

    Could someone be kind enough to post the Nicholai 67 breakout adapter gerbers please? I tried downloading them from the chipmaker.ru site, but had no luck.
    Thanks!

  8. #128
    Join Date
    Nov 2006
    Posts
    78

    Re: Russian Arduino Lead Screw Project??

    Hiya Jazz,
    After a bit of file searching i found em.
    cheers,
    Qtronpowerson.
    note: This forum wont upload RAR files!
    i got mine made by JLCPCB, China.
    I have a spare if U like
    Attached Files Attached Files

Page 7 of 7 567

Similar Threads

  1. Electronic lead screw (gear box), with Arduino for lathes
    By the_muck in forum CNC Machine Related Electronics
    Replies: 28
    Last Post: 05-01-2023, 09:19 PM
  2. Lead Screw pitch and Bearings,coupling for lead screw
    By Power_user_EX in forum Linear and Rotary Motion
    Replies: 1
    Last Post: 06-12-2012, 12:37 PM
  3. Russian CNC project - my first router
    By maxvovk in forum CNC Wood Router Project Log
    Replies: 17
    Last Post: 10-21-2007, 11:59 PM
  4. New technology.... old debate.....ball screw vs lead screw
    By trubleshtr in forum Linear and Rotary Motion
    Replies: 1
    Last Post: 08-16-2005, 02:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •