Hi all, I hope this finds you well.
Cutting out shaker style doors & drawer fronts today and I noticed 4 different patterns on the outer corner. Inner corners also have a similar effect but can be chiselled out easily. Any tips on what's happening here?
Photo attached, it is taken from the side of the machine (up/down on the image is the X axis, left/right is the Y)
No noticeable sound that would cause alarm, nor is there any odd shaking / jerking.
Setting is to roll around the outer corner. No settings for inner corner, '2D Pocket' operation.
Avid CNC 48 x 96, 4HP spin
Fusion 360
6mm compression bit on 22mm MR MDF
Feedrate 6000 mm/min, Lead In 3000 mm/min
3mm maximum step-down
Many thanks.