hello. i have problem with cncmill siemens 808d when i execute program g-code
%_N_Test_MPF
;PATH=/_N_MFP_DIR
N14 G291
N2 (6 MM 2 FLUTE CARB E.M.)
N3 G91 G28 X0 Y0 Z0
N4 M06
N5 S4000 M03
N6 G90 G54 G00 X-115.085 Y-108.147
N7 G43 Z-251.915 M08
N8 G01 Z-252.915 F322.
N9 G17 Y-108.245 Z-253.533
N10 Y-108.529 Z-254.09
,
N8982 G91 G28 Z0
N8983 G28 X0 Y0
N8984 M30
the plc Blocking and all led`s are flashing

in 2017/02/06 the alarms
- 400001
-400000
-26100
-1005 : p1:10090017h p2:8E185CB0H P3:00000000H P4:00000000H
-6583

in time:2017/02/07 the alarms
- 2000
-3000

in time:2017/02/08 the alarms
-1005 : p1:10090017h p2:8E185CB0H P3:00000000H P4:00000000H
-26100

in time:2017/02/08 the alarms
-200005
-4065
-400005
-400000
-2000
-3000
please can anyone help me because a service assistance siemens does not exist in my country.

best regard.