Is it possible to rescale slots on a dxf/cad plan without acctually altering the size of the model? There are times when we have ply delivered it has a 0.5mm difference in thickness. We have therefore had to re-size our plans and end up using more ply and making the models 10 - 15% larger than planed. Thanks
Results 1 to 2 of 2
-
02-19-2017, 09:44 AM #1
Registered
- Join Date
- Aug 2013
- Posts
- 8
Re Scaling Slots without altering the size of the model
-
02-19-2017, 12:52 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Re Scaling Slots without altering the size of the model
It depends.
If they are just 2D drawings, then yes. But, if you have a lot of them,could be a long and tedious process.Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
POST altering hELP
By houdini in forum GibbsCAMReplies: 2Last Post: 08-02-2014, 02:54 PM -
Looking for someone to make prototype molds (model car size) regularly
By Walter7 in forum Employment OpportunityReplies: 1Last Post: 08-25-2013, 10:13 PM -
Altering reference position
By samu in forum FanucReplies: 1Last Post: 12-19-2012, 09:45 AM -
v23 Inventor .stl - Incorrect model size
By trumpy81 in forum BobCad-CamReplies: 6Last Post: 01-30-2012, 10:22 PM -
Would this work for scaling size up or down?
By wolfdagon in forum Machines running Mach SoftwareReplies: 4Last Post: 04-27-2008, 01:02 AM
Tags for this Thread
Posting Permissions
