584,862 active members*
4,814 visitors online*
Register for free
Login

Thread: lasercut 6.1

Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2011
    Posts
    69

    lasercut 6.1

    I need to know what my setting are to read in the X & Y

    I have a LT-6090

    My X=900 for length one pules move length is 0.0039656251

    My Y=600 for length one pules move length is 0.0039656251 this is wrong what should it be

    per length reads 19.828125 pluse counts reads 5000

    what should i put in to make this wright
    Attachment 350910Attachment 350912

  2. #2
    Join Date
    Jan 2017
    Posts
    40

    Re: lasercut 6.1

    I made a 100mm x 100mm square. Cut plywood and then measured the cut. I adjusted the numbers so the catual cut and sofware matched. You need to reset the machine after each download of settings.

Similar Threads

  1. Help for my lasercut
    By ilpresidente in forum Laser Engraving / Cutting Machine General Topics
    Replies: 3
    Last Post: 09-24-2014, 05:07 AM
  2. Help for my lasercut
    By ilpresidente in forum Laser Engraving / Cutting Machine General Topics
    Replies: 0
    Last Post: 09-13-2014, 04:35 PM
  3. LaserCut 5.0
    By edsawen in forum LaserCut
    Replies: 13
    Last Post: 08-21-2012, 03:08 PM
  4. lasercut
    By LOLO80 in forum Laser Engraving / Cutting Machine General Topics
    Replies: 7
    Last Post: 04-11-2009, 01:56 PM
  5. Lasercut 5.3 (5.2)
    By bibi in forum Laser Engraving / Cutting Machine General Topics
    Replies: 1
    Last Post: 03-18-2009, 03:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •