The control is a 18i-tB. There is no [SET FRP] in the operation menu under Pos. Only PRESET,ORIGIN,PTSPRE and RUNPRE. Which parameter do I have to change to make the floating reference position button appear?
Thanks!
The control is a 18i-tB. There is no [SET FRP] in the operation menu under Pos. Only PRESET,ORIGIN,PTSPRE and RUNPRE. Which parameter do I have to change to make the floating reference position button appear?
Thanks!
Also entering G30.1 or G30.1U0W0 in MDI it says improper G-code. Is it an option? Parameter #1244 seems to show values for the floating reference position anyway.