Hello,
I am trying to cam up a part in CamWorks and I am having some trouble with my chamfer feature. All of the examples I found online setup the chamfer as a part perimeter. I only need it to go along one edge but I can't seem to properly set it up. I have also tried doing a surfacing operation but with no avail. Below are some screen shots of my part. I am fairly new to CamWorks so any help is greatly appreciated. Thanks!
Thread: CamWorks Chamfer On One Edge?
Results 1 to 2 of 2
-
02-21-2017, 08:17 PM #1
Registered
- Join Date
- Feb 2017
- Posts
- 0
CamWorks Chamfer On One Edge?
-
02-23-2017, 08:35 PM #2
Registered
- Join Date
- Feb 2017
- Posts
- 2
Re: CamWorks Chamfer On One Edge?
Open Profile is the feature that you will need for this.
It also looks like you don't have a good edge to grab directly and will need to come off of a sketch.
Reply With QuoteSimilar Threads
-
Camworks in Solidworks assembly mode - cannot access camworks features
By demonx in forum CamWorksReplies: 3Last Post: 10-05-2017, 02:03 PM -
Gopher Motorsports Gaining Competitive Edge with Jet Edge Waterjets
By Jetedge in forum News AnnouncementsReplies: 0Last Post: 02-19-2016, 05:59 PM -
Chamfer Machining Camworks
By butert in forum CamWorksReplies: 2Last Post: 09-30-2015, 06:06 PM -
CAMworks for Solid Edge (student)
By perci in forum Uncategorised CAM DiscussionReplies: 3Last Post: 11-30-2014, 04:35 AM -
tapped hole chamfer with iscar chamfer tools
By dcutler35 in forum MastercamReplies: 7Last Post: 12-07-2012, 02:30 PM
Tags for this Thread
Posting Permissions
