585,741 active members*
5,059 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Dolphin CAD/CAM > Tool change goes through part

Thread: Tool change goes through part

Results 1 to 3 of 3
  1. 09-17-2016, 03:54 PM #1
    markclayton
    markclayton is offline Registered
    Join Date
    Sep 2016
    Posts
    5

    Tool change goes through part

    HI there I am using Dolphin Cam turning module the problem i have is when i simulate the tool path the tool change goes through the part.

    After post processing this runs OK on the HAAS SL20 but looks wrong when checking the tool paths in the software any ideas tried all sorts of setting combinations.

    Kind Regards Mark


    Reply With Quote Reply With Quote
  2. 01-26-2017, 08:38 PM #2
    FastFarmer
    FastFarmer is offline Registered
    Join Date
    Jul 2010
    Posts
    180

    Re: Tool change goes through part

    Did you solve this? You're geometry/profiles are wrong. You should see the complete part in the cam, not half...
    Reply With Quote Reply With Quote
  3. 02-10-2017, 04:40 PM #3
    andre-dolphin
    andre-dolphin is offline Registered
    Join Date
    Feb 2007
    Posts
    412

    Re: Tool change goes through part

    I beleive my colleague Michael sorted this out with mods to the post.

    ATB
    Andre
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Spindle drop from Z Home for tool change, is there a way to change distance?
    By Dallas J in forum Tormach Personal CNC Mill
    Replies: 6
    Last Post: 05-10-2016, 12:30 AM
  2. Dorian Tool SD30BXA Quick Change BXA Tool Post New Unused!
    By Contract_Pilot in forum For Sale Only
    Replies: 1
    Last Post: 06-28-2015, 12:46 AM
  3. how do i change the tool change arm parameter ???
    By stevenlee in forum Fanuc
    Replies: 5
    Last Post: 05-19-2015, 10:42 PM
  4. How to change Tool change position(About MAZATROL T1 control)
    By liushuixingyun in forum Mazak, Mitsubishi, Mazatrol
    Replies: 6
    Last Post: 01-07-2014, 01:33 AM
  5. How do I change the Tool Change Position?
    By RussMachine in forum Tormach Personal CNC Mill
    Replies: 4
    Last Post: 01-04-2014, 08:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules