Hallo,
I have an tailstock I can move manual with 2 buttons. But when I try to write some g-code I always get an error.
My Emco Concept Turn 155 is an TCM machine and use 12 tools revolver and 6 was driven tool.
I use C-axel but I can´t find right code to move the tailstock.
I have try to write N10 G0 M21 Z75 etc.
The instructions book.
Unfortunately, it says nothing about how to deal with tailstock.
Do you now any thing about this, please tell me.
Results 1 to 2 of 2
-
02-27-2017, 10:37 PM #1
Registered
- Join Date
- Jan 2006
- Posts
- 121
How to move the tailestock with M20/M21
-
03-02-2017, 04:51 PM #2
Registered
- Join Date
- Oct 2006
- Posts
- 59
Re: How to move the tailestock with M20/M21
What is the error? M21, chuck must be clamped, and the tailstock prox must be set according to manual. If prox is not set it, will give error about sleeve position, check your pm.
Reply With QuoteSimilar Threads
-
finnpower strange move part in nest and tools remain not move with all geometry and
By bogd1n in forum Uncategorised CAM DiscussionReplies: 0Last Post: 03-12-2016, 08:30 AM -
OSP 200M linear move and rotary move on same line. How is feedrate calculated
By TommyCNCGuy in forum OkumaReplies: 2Last Post: 11-11-2015, 01:55 PM -
move to saved location or move a fixed distance
By BikeCourse in forum Mach MillReplies: 0Last Post: 03-21-2015, 03:06 AM -
plunge after first move and retract after last move
By Joesph Jackman in forum MastercamReplies: 9Last Post: 02-24-2012, 06:15 AM -
Mach3plasma can't move my servo motor during Mach3Mill can move it ?
By nhson104 in forum Mach Plasma / LaserReplies: 6Last Post: 03-14-2011, 09:41 PM
Tags for this Thread
Posting Permissions
