584,874 active members*
5,276 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Doosan 2000sy turret alignment
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2004
    Posts
    218

    Doosan 2000sy turret alignment

    I have a 2006 doosan 2000sy lathe that could use a turret alignment, the drill is not on Z axis center line but drilling at a slight angle.
    I measure .004 over 4 inches. Seems simple enough, just loosen turret and adjust. The problem is I can't see any bolts to loosen? This machine don't have a standard bolt on turret.
    Can someone please explain to me how to align this type of turret.
    Thanks guy's.

  2. #2
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan 2000sy turret alignment

    What is the serial number?
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

Similar Threads

  1. 2010 doosan 2000sy
    By positiverake in forum Daewoo/Doosan
    Replies: 5
    Last Post: 02-24-2017, 11:35 PM
  2. Doosan 2000sy Turret drive back up battery
    By mroy0404 in forum Daewoo/Doosan
    Replies: 1
    Last Post: 08-19-2014, 01:52 AM
  3. Doosan 2000sy work ejection
    By mroy0404 in forum Daewoo/Doosan
    Replies: 2
    Last Post: 02-14-2012, 03:59 AM
  4. Doosan 2000sy
    By mroy0404 in forum Daewoo/Doosan
    Replies: 3
    Last Post: 01-28-2012, 01:18 AM
  5. Doosan 2000sy not on center
    By mroy0404 in forum Daewoo/Doosan
    Replies: 6
    Last Post: 01-09-2011, 11:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •