I already had all the frame work done from previous HY plugin so I put this one together. UCCNC comes with a great Modbus plugin, but without prior knowledge of Modbus and writing macros it can be a little tricky and discouraging getting spindle up and running. This plugin is for the less advanced user who can now have there spindle controlled by UCCNC quickly, painlessly with least expensive solution.

Don't have setup instructions enclosed with zip yet but the most setup will be with VFD and it's manual, a few notes for plugin is as follows.

1. Baudrate must match VFD set Baudrate.

2. VFD should be set to 8-N-1.

3. All Register fields input needs to be 2byte hexadecimal. (See screens posted below)

4. Plugin is for typical Chinese spindle 400HZ/24000rpm only.

I posted some screen shots for setup for some of the popular VFD's like NOWFOREVER, MACHTRIC and HITACHI, I will post more when manuals become available.


Attachment 353686 NOWFOREVER E100

Attachment 353688 MACHTRIC S800E

Attachment 353690 HITACHI X200

Download here>>>>>>>>>>>>>>>>>>>>Attachment 353896