Hi.
My name is Ed and I'm just getting into the CNC aspect my Sherline Mill and Lathe. Just outfitted my long bed Sherline lathe with CNC Mounts and motors. Running the correct version of Mach3 and have a Soigeneris ESS (model SSENC-2), dowloaded the patch from Warp 9 for the ESS. Everything loaded fine. Mach3 opens up, see's the ESS, but I can't jog the motors. I've been searching for the correct Pins and Ports configuration, but this a little new to me. I know this is a rookie mistake, and for that I apologize. Can anyone point me in the right direction for these setting. Much appreciated.
-Ed/emojo5
Forgot to mention the controller. I have a DeepGrove1 CNC Controller box using a Gecko G540 board. Thanks again.