I'm new to Mach3 and just finished building a CNC router. I was able to get my soft limits working. However, I thought I could make my min 0 for X and Y and it would not activate my hard limits.
Here is a picture of the current settings
To make the mill stop before I hit the hard limit, I need to enter .25 for Soft Min in X and Y. For the Z axis, a Soft Max of 0 stops well short of hitting the hard limit. I thought the X and Y should work like the Z.
Also, if I enter .2500 in the Home Off field it gets changed to .2499 in the X and Y. Seems like something is causing X and Y to act different than the Z. Any ideas of what to check or is this normal?
Thanks,
Allen