We built a CNC machine using David Steele's CNC plans (www.solsylva.com) and designed a control board and software using our Stellaris ARM Cortex-M3-based microcontrollers to show how we can control three steppers with one very cost-effective MCU. The app note (AN01246), schematics, and software are available at www.LuminaryMicro.com. To build the CNC machine, you'll need to purchase a set of David Steele's plans; the use of our control design and software is free when used with Stellaris microcontrollers.
If you live in the California Bay area, we will be demonstrating the CNC machine live (with pen and paper, as the tradeshow people frown on sawdust :-) at the Embedded Systems Conference, April 3-5, 2007, booth 3077.
Enjoy!
Jean Anne Booth
CMO, Luminary Micro
Results 1 to 2 of 2
-
02-25-2007, 02:25 PM #1
Registered
- Join Date
- Feb 2007
- Posts
- 1
Full control software and hardware available for a Solsylva.com CNC design
-
02-25-2007, 09:04 PM #2
Member
- Join Date
- Dec 2004
- Posts
- 1316
As I posted before we await your video. I guess you could set it up in you tube and post the link.
Jason
Reply With QuoteSimilar Threads
-
Hardware store design CNC router #1
By cncadmin in forum Open Source CNC Machine DesignsReplies: 528Last Post: 08-18-2015, 11:56 PM -
Hardware Store CNC Router Design #2
By datacop in forum Open Source CNC Machine DesignsReplies: 10Last Post: 12-05-2006, 01:07 AM -
First router - Modified solsylva design
By Guldberg in forum CNC Wood Router Project LogReplies: 16Last Post: 10-20-2006, 04:02 PM -
Isel EP-1090 control and design software
By Riffraff2 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 7Last Post: 05-03-2006, 01:46 PM
Posting Permissions
