584,833 active members*
5,660 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Vectric > Post Processors > VCarve Pro compatibility with Arduino/Grbl Control Software
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2017
    Posts
    1

    Red face VCarve Pro compatibility with Arduino/Grbl Control Software

    Hi,

    I'm new to the world of CNC's and just got an OpenBuilds Big Ox CNC Machine.... it came with Arduino/Grbl control software. Will V-Carve Pro tool paths be compatible with my machine??

    Thank you in advance!

  2. #2
    Join Date
    Mar 2003
    Posts
    35538

    Re: VCarve Pro compatibility with Arduino/Grbl Control Software

    There should be a post processor that will work, or you can easily modify one to suit.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. Which pp to choose for arduino grbl?
    By CptanPanic in forum Post Processors
    Replies: 2
    Last Post: 03-08-2021, 11:05 PM
  2. Arduino GRBL VS LinuxCNC
    By valmar in forum DIY CNC Router Table Machines
    Replies: 57
    Last Post: 01-15-2018, 05:50 PM
  3. arduino nano with grbl
    By mrsnowie in forum Hobby Discussion
    Replies: 2
    Last Post: 01-06-2016, 06:25 AM
  4. Interfacing Arduino + GRBL with 3020 control box
    By dannystaple in forum Open Source Controller Boards
    Replies: 3
    Last Post: 02-05-2014, 10:01 PM
  5. Should I use LinuxCNC or grbl/arduino?
    By CptanPanic in forum LinuxCNC (formerly EMC2)
    Replies: 3
    Last Post: 04-23-2012, 07:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •