i am using hurco hawk 5m ultimax3 its show error "power cabinet temp too high enter machine diagnostic" i need help how resolve this problem.
i am using hurco hawk 5m ultimax3 its show error "power cabinet temp too high enter machine diagnostic" i need help how resolve this problem.
check the power supply voltages. sounds like low voltage there should be test points on the rack -12, 5, 12, 24vdc. the 5 volt rail should be 5.10
if they are all good, then try the oldie but goodie pull the cards clean the connections and put it back together.
Thanks for reply i already check all voltage of supply fans are running and card put different slot but result is same.