Hi All,
my PI8600 shows the following at startup
EoCP
which is apprantly an Error Over Current Protection
I have used the following User Manual
http://alis.kms-bg.com/catalogue/PI8600manual.pdf
Still it is very hard to understand what to do. It seems that you have to "confirm" the alarm in order to proceed but I can't find what the confirm sequence is. It seems that the red button allows you to reset/confirm the alarm but how this is achieved is not really well documented
Right now the VFD stays in this mode which prevents it from being used in normal operations at all .
Any help is therofor greatly appriciated!
Thanks