584,808 active members*
4,992 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Rhinocam > 4axis rhinocam parallel finishing act weird
Results 1 to 6 of 6
  1. #1
    Join Date
    Apr 2017
    Posts
    2

    4axis rhinocam parallel finishing act weird

    hi
    first picture shows how item must be,second picture shows the item after horizondal routing simulate and t third picture shows the problem, that the simulation cut off the object at the
    end to several pieces,something that sould not do.Any ideas why is that happening?
    I have make simulare item with out any problem,
    Any help would be greatful!
    Thanks

  2. #2
    Join Date
    Apr 2017
    Posts
    2

    Re: 4axis rhinocam parallel finishing act weird

    Please guys.
    Nobody have any simirar problem?
    Or knoing something about it?

  3. #3
    Join Date
    Apr 2004
    Posts
    5728

    Re: 4axis rhinocam parallel finishing act weird

    Have you asked Mecsoft's tech support about this issue? One really nice thing about RhinoCAM is that it comes with free telephone tech support. The technician can share your screen, show you where you went wrong, and how to fix it. You're in a different time zone, but it might be worthwhile to stay up late some night and call in during business hours in the Pacific Standard Time zone.
    Andrew Werby
    Website

  4. #4
    Join Date
    Mar 2010
    Posts
    95

    Re: 4axis rhinocam parallel finishing act weird

    How is toolpath looking? What tool do you using for finishing?
    I not sure it helps, but you may try:
    Go to Tools-Options
    In Document Properties go to Mesh and change Jagger&Faster to Smooth& Slower
    Recalculate TP
    Rerun Simulation

  5. #5
    Join Date
    May 2010
    Posts
    11

    Re: 4axis rhinocam parallel finishing act weird

    It would help if you posted the 3DM file.

    fcc

  6. #6
    Join Date
    Dec 2003
    Posts
    1206

    Re: 4axis rhinocam parallel finishing act weird

    Are all the normals the correct way round?

Similar Threads

  1. HELP! parallel finishing Problem HELP!
    By Macguitar in forum Rhinocam
    Replies: 6
    Last Post: 03-25-2017, 05:19 PM
  2. Replies: 1
    Last Post: 02-29-2016, 01:26 AM
  3. Parallel Finishing Problem
    By kyle_vk in forum Rhinocam
    Replies: 3
    Last Post: 04-13-2015, 10:41 AM
  4. Weird circle G03 in Rhinocam Mach3 inch post
    By btsioles in forum Rhinocam
    Replies: 5
    Last Post: 10-22-2014, 09:56 PM
  5. Weird thread, taper into parallel.
    By inflateable in forum MetalWork Discussion
    Replies: 7
    Last Post: 06-09-2010, 03:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •