Hi Guys,
I'm quite desperate here now. After our laser cutter had skipping issues, we tried to restore the cutter to factory defaults. Once we did a restart, the head seems to be out of sync with the display and is now vibrating a lot when moving thru the y axis. Also, the X axis seems to be hitting the edges a lot. If you look at the picture with the screen, you can see that the Y axis is set to 0.0mm but the actual laser head is at the center. There is no way to move the head up and if I move it down, I can't bring it back up. The movement of the Y axis is also not smooth as compared to before. It makes loud noises whenever I move it.
Any help or suggestion is highly appreciated.
Hoping for your feedback!
Results 1 to 20 of 26
Threaded View
-
04-12-2017, 11:14 PM #1
Registered
- Join Date
- Mar 2017
- Posts
- 7
X and Y axis problem. DOES NOT MATCH THE ACTUAL LASER HEAD
Reply With QuoteSimilar Threads
-
Laser head touch the left axis
By medmouncef in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 06-11-2020, 03:54 PM -
Problem! - Laser Head going off table boundaries
By quetzalstudio in forum Laser Engraving / Cutting Machine General TopicsReplies: 2Last Post: 02-24-2017, 03:55 AM -
Decreasing the laser head transit time between actual cuts
By vrc321 in forum Laser Control SoftwareReplies: 1Last Post: 01-04-2017, 05:25 PM -
Build double head laser with motorized x axis on each head
By amders in forum Laser Engraving / Cutting Machine General TopicsReplies: 0Last Post: 03-15-2015, 02:41 PM -
Laser Head won't move along Y axis...
By jassk in forum Laser Engraving / Cutting Machine General TopicsReplies: 4Last Post: 05-03-2012, 04:42 AM
Tags for this Thread
Posting Permissions
