585,748 active members*
3,591 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > Hurco VM10i Adjust the clock on the control

Thread: Hurco VM10i Adjust the clock on the control

Results 1 to 4 of 4
  1. 04-13-2017, 02:41 PM #1
    porkchop831
    porkchop831 is offline Registered
    Join Date
    Jun 2006
    Posts
    3

    Hurco VM10i Adjust the clock on the control

    Does anyone know how to set the clock on the control? It's the small one in the lower right corner of the control...Thank you in advance for helping.
    Reply With Quote Reply With Quote
  2. 04-13-2017, 06:55 PM #2
    bloke
    bloke is online now Member
    Join Date
    Jun 2008
    Posts
    1103

    Re: Hurco VM10i Adjust the clock on the control

    Get the keyboard and press Ctrl then Esc.
    Tap the little green tab that appears on the left.
    Tap Control panel.
    Double tap date and time.
    Set the time like you would on your PC.
    Apply.
    Close windows.
    Tap left green tab again.
    Scroll to the bottom and tap Return to Winmax.
    Reply With Quote Reply With Quote
  3. 04-13-2017, 07:08 PM #3
    porkchop831
    porkchop831 is offline Registered
    Join Date
    Jun 2006
    Posts
    3

    Re: Hurco VM10i Adjust the clock on the control

    Quote Originally Posted by bloke View Post
    Get the keyboard and press Ctrl then Esc.
    Tap the little green tab that appears on the left.
    Tap Control panel.
    Double tap date and time.
    Set the time like you would on your PC.
    Apply.
    Close windows.
    Tap left green tab again.
    Scroll to the bottom and tap Return to Winmax.
    Perfect!! Thank you so much! Worked like a charm.:cheers:
    Reply With Quote Reply With Quote
  4. 04-13-2017, 09:15 PM #4
    bloke
    bloke is online now Member
    Join Date
    Jun 2008
    Posts
    1103

    Re: Hurco VM10i Adjust the clock on the control

    Nifty!
    ��
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. 4th axis on Hurco VM10i
    By johnhdsi in forum HURCO
    Replies: 5
    Last Post: 10-07-2014, 02:45 PM
  2. HURCO VM10i
    By 85burban in forum HURCO
    Replies: 2
    Last Post: 05-10-2014, 01:19 PM
  3. New VM10i Owner: Cheap touch probe options?
    By makerstoolworks in forum HURCO
    Replies: 4
    Last Post: 11-02-2013, 12:01 AM
  4. How do I adjust drives on Hurco BX
    By Jackal66 in forum HURCO
    Replies: 2
    Last Post: 06-14-2010, 03:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules