Show off the projects you have made with your machine.
To start it off here are a few of mine;
An Eagle cut from 1/8 Acrylic.
Policeman's Prayer engraved in Cherry wood.
Words scanned on a Bamboo cutting board.
Show off the projects you have made with your machine.
To start it off here are a few of mine;
An Eagle cut from 1/8 Acrylic.
Policeman's Prayer engraved in Cherry wood.
Words scanned on a Bamboo cutting board.
The Novakon/Bodor laser cutter/engraver machine exceeded my expectations today. I was able to cut 3/4" acrylic and 3/4" plywood in one pass with out having smoke or burn marks on the top or bottom of the material.
The chess pieces were cut from 1/4", 3/8", 1/2" and 3/4" cast acrylic. The acrylic edge finish was super smooth and did not require any additional finishing. The doll furnitur was cut from 3/4" five ply plywood without smoke or burn marks. No masking or taping of the wood was required. Again, all materials were cut in one pass.