584,866 active members*
4,982 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Haas Machines > Haas Mills > VR series machine, 5 axis tap cycle??
Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2012
    Posts
    125

    VR series machine, 5 axis tap cycle??

    So we have three VR machines. We have a programmer that has tried to use the G155, G164, G174, and G184 tap cycles. None of them work. G174 and G184 move to position and do nothing else. G155 turns the spindle the wrong direction and goes to deep. G164 does the same as G155. Has anyone ever used this option on a VR machine?

  2. #2
    Join Date
    Mar 2014
    Posts
    133

    Re: VR series machine, 5 axis tap cycle??

    Contact Haas Automation in Oxnard California. Ask for apps dept or choose the phone option of software related questions. Tell the guy your issue and they will help you solve your problem,

  3. #3
    Join Date
    Jun 2012
    Posts
    125

    Re: VR series machine, 5 axis tap cycle??

    They tell me to call my local HFO.

  4. #4
    Join Date
    Mar 2014
    Posts
    133

    Re: VR series machine, 5 axis tap cycle??

    Sounds like a control/software issue. You probably should get a tech in there. unfortunately if we tell you to try something it won't be covered under warranty that your HFO could provide you. Definitely sounds like a control issue

Similar Threads

  1. Replies: 0
    Last Post: 02-02-2017, 04:08 AM
  2. Need a replacement Z Axis ball nut for a SF Series machine
    By rugbyal in forum Multicam Machines
    Replies: 3
    Last Post: 12-26-2014, 12:16 AM
  3. o-t series drilling cycle
    By Michael82 in forum Fanuc
    Replies: 20
    Last Post: 04-20-2008, 07:07 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •