Hi guys,
I guess I have been on this project for over a year now, probably should finish it.
I have mach 4 V 3372 and the profile V 185 (I think) running the router mode
the c-62 board leads the way using the c-55 to trigger power to the easy servos.
the es dh-1208 servo drives have the C-43 set to soft
It took very little changes to have the indicator lights working for step and dir.
on screen everything is working and running my g code. in the box the dir lights are indicating all is moving.
the servo drives are just staring at me and mocking my very soul. the drives show L O that I assume says it is receiving no signal.
oh please, wave a magic wand for me :-)