[gfmer18]

I have put Flashcut Cnc onto these machines....machining center and a turning center

[datac]

What a fun topic !

1. A Western Engravers 2448 Router
Had OEM, then Ah-Ha!, Finally Flashcut

2. Digital Tool CNC Router (2 of them)
1 Had OEM, then Ability Systems Indexer LPT, Finally Flashcut
Other had OEM, then Flashcut

3. A Data-Cut CNC Router
Had IndexerLPT, toyed with Mach, then finally real with Flashcut

4. A New Hermes 7200 Engraver
Had OEM, then Flashcut

5. A Western Engravers 1624 Engraver
Had OEM, Tested and toyed with Mach3 and LinuxCNC, but finally Flashcut

6. A Novakon NM200
Had Mach3, but very quickly retro'd to Flashcut

7. A Grizzly G0704 Conversion
Flashcut all the way......

8. A Denford Orac CNC Lathe
Had OEM, then Flashcut

9. Two Different Home built engraving machines
Only Flashcut

10. Two Different Home built CNC plasma machines
Only Flashcut

11. A close friends home built CNC Router
Had DeskNC, but first productive with Flashcut

12. Have my eye on a dead Multi-Cam currently.
Care to guess what It will run ? Lol.....

Hope I did not forget any. Some I own, some I sold, some I retrofitted for others. My little black S/G boxes get a lot of miles on them as I simply could not afford to have a dedicated control on all of them. What an excellent program though... I've been impressed since late 1996 or early 1997 and have not regretted a thing.

If I ever get my life back, I intend to build some more machines !

- - - Updated - - -

What are your machines by the way ? Very nice if home built !

[Gamble]

2x2 torchmate growth series - I put flashcut controls on
MaxNc 15 CNC mill - flashcut controls

[sybilsurf]

Acra knee mill....never lets me down!