[slipery]

I need to write a Macro Pump ( I think) to monitor fluid flow from 2.2 KW water cooled spindle. ( I want to stop or pause machine if water flow is interrupted from the spindle). I have the circuit designed and constructed so that I get a True/False signal to one of the inputs of my BOB but I don't know how to use the info to stop the router.
The Artsoft tutorial is fairly limited and I was hoping some one can direct me to a better (more advanced) tutorial on using scripts and macros in Mach3. If not perhaps a kind person could tell me how to do it.

[ger21]

Something like this:

If IsActive(Input1) then
DoOEMButton(1001)


Save as Macropump.m1s in the proper macro folder, and enable macropump in general config.

http://www.machsupport.com/wp-conten...o_Prog_Ref.pdf
Mach3Wiki

[slipery]

Your a gentleman and a scholar thank you very much. Exactly what I was looking for especially the macro referance
Cheers