584,841 active members*
4,316 visitors online*
Register for free
Login
Results 1 to 10 of 10
  1. #1
    Join Date
    Feb 2017
    Posts
    5

    Salvagnini p2 ABS programming

    Hello,
    I´m have been operating and programming salvagnini p2 for 3 months. Now I would like to learn about ABS programming. I hope that someone could send me some program example to get started width ABS programming. I write my programs manually, not with Edit p4.

    Andy

  2. #2
    Join Date
    Dec 2016
    Posts
    9

    Re: Salvagnini p2 ABS programming

    Quote Originally Posted by andy9 View Post
    Hello,
    I´m have been operating and programming salvagnini p2 for 3 months. Now I would like to learn about ABS programming. I hope that someone could send me some program example to get started width ABS programming. I write my programs manually, not with Edit p4.

    Andy
    Hello Andy9
    Have you already learned a basic course of ABS programing?

  3. #3
    Join Date
    Feb 2017
    Posts
    5

    Re: Salvagnini p2 ABS programming

    Hello,
    I have not learned a basic course of ABS programming therefore its quite hard to get started. I found some examples from manual but they are bit hard to understand.

  4. #4
    Join Date
    Dec 2016
    Posts
    9

    Re: Salvagnini p2 ABS programming

    Quote Originally Posted by andy9 View Post
    Hello,
    I have not learned a basic course of ABS programming therefore its quite hard to get started. I found some examples from manual but they are bit hard to understand.
    You must know that ABS may be gangerous for your machine if you make mistake.
    Is that option already activated on your machine?

  5. #5
    Join Date
    Feb 2017
    Posts
    5

    Re: Salvagnini p2 ABS programming

    I am not sure if the ABS is enabled or not. Is there a easy way to see if ABS is activated or not?

  6. #6
    Join Date
    Dec 2016
    Posts
    9

    Re: Salvagnini p2 ABS programming

    I dont know how to check it phisically but you can insert one ABS command for your regular program and see what the machine say.
    For example
    ABS: Z1 15 Y1 -15

  7. #7
    Join Date
    Feb 2017
    Posts
    5

    Re: Salvagnini p2 ABS programming

    Okey thanx, I will try it out on monday

  8. #8
    Join Date
    Dec 2016
    Posts
    9

    Re: Salvagnini p2 ABS programming

    So what is your result?

  9. #9
    Join Date
    Feb 2017
    Posts
    5

    Re: Salvagnini p2 ABS programming

    Quote Originally Posted by p2_lean View Post
    So what is your result?
    I tried to write ABS command and got error ´´No profile assignment after ABS-set´´ error explanation ´´define profile with instruction PRF XP YP

  10. #10
    Join Date
    May 2020
    Posts
    1

    Re: Salvagnini p2 ABS programming

    Quote Originally Posted by p2_lean View Post
    You must know that ABS may be gangerous for your machine if you make mistake.
    Is that option already activated on your machine?
    Hi Guys, is anybody use StreaemBend S/W of Salvagnini, I have using it for 8 months now, I found it too hard to make ABS programming on. We had a basic training from the Salvagini guy, but due to it was new software, even he could not make ABS program on StreamBend S/W (strange), is any body has made ABS program on it?
    Last edited by Nedeem; 12-01-2020 at 11:38 PM.

Similar Threads

  1. Radius bend - salvagnini
    By p2_lean in forum Bending, Forging, Extrusion...
    Replies: 8
    Last Post: 12-13-2016, 05:05 PM
  2. Salvagnini or Trumpf programmers
    By Independent CNC in forum Community Club House
    Replies: 17
    Last Post: 09-23-2013, 02:05 PM
  3. I need/tutor/assistance/programming/salvagnini
    By redford in forum Want To Buy...Need help!
    Replies: 1
    Last Post: 02-27-2009, 02:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •