[ilsapo]

Hello, anybody knows if a post processor for Busellato Jet 4XXX from Rhinocam exists anywhere?
Among the many available for Rhinocam there is none...althought I experimented and it seems that some of the available ones get close to the desired result, none of them is accepted by the Genesis software.
Also, there is a way in Rhinocam to split the G-code since Genesis has a limitation at about 1500 lines.
Any help appreciated, thank you very much!

[awerby]

Assuming you've got a legal copy of RhinoCAM, Mecsoft will configure a post for your machine for free; that's part of their excellent tech support service. You'll need to supply them with a sample of code that works on your machine, and they will get it to work with RhinoCAM.