[djs_Aqua]

Hi,
I've acquired a Rofin Easymark (not so easy without software/computer)
Unit is in great shape, powers up, appears the z-axis homes.
Ive contacted Coherent, but due to end of life, they're unable to help.
Supposedly this unit requires lasercad , the computer did not come with the unit but did have the fume extractor.
- If I am able to find a copy of lasercad, will I need a key to activate, I'm asuming so, Whom to purchase from?
- I was told it should of came with a laptop with the software, so no additional PCI card ?
I'd like see if the unit is functional at minimal cost if possible.

Any advice/help much appreciated.
thanks,
dan

[Dean448]

Sorry I don’t know anything about lasercad but I think it’s the same as lightburn that can easily be purchased


Sent from my iPhone using Tapatalk

[keyencelaser]

Hi,
I've acquired a Rofin Easymark (not so easy without software/computer)
Unit is in great shape, powers up, appears the z-axis homes.
Ive contacted Coherent, but due to end of life, they're unable to help.
Supposedly this unit requires lasercad , the computer did not come with the unit but did have the fume extractor.
- If I am able to find a copy of lasercad, will I need a key to activate, I'm asuming so, Whom to purchase from?
- I was told it should of came with a laptop with the software, so no additional PCI card ?
I'd like see if the unit is functional at minimal cost if possible.

Any advice/help much appreciated.
thanks,
dan

as far as I know Rofin always was using VLM - VisualLaserMarker
software looks like this
https://www.youtube.com/watch?v=ucbLHsFd_ow
2007 so version 4.00
rofin laser always had own computer and ALI laser card - and locked software
ali card like this
https://www.ebay.com/itm/332414900124
or this
https://www.ebay.com/itm/263049203989
or
https://www.ebay.com/itm/293927908910
or computer
https://www.ebay.com/itm/324117102482
https://www.ebay.com/itm/113862378444
and software dongle
https://www.ebay.com/itm/262084381565

Regards.

[behrhart]

Hello,

You need a copy of the Rofin software called LaserCAD.

I have a copy please message me and I can help.

[behrhart]

Hi,
I've acquired a Rofin Easymark (not so easy without software/computer)
Unit is in great shape, powers up, appears the z-axis homes.
Ive contacted Coherent, but due to end of life, they're unable to help.
Supposedly this unit requires lasercad , the computer did not come with the unit but did have the fume extractor.
- If I am able to find a copy of lasercad, will I need a key to activate, I'm asuming so, Whom to purchase from?
- I was told it should of came with a laptop with the software, so no additional PCI card ?
I'd like see if the unit is functional at minimal cost if possible.

Any advice/help much appreciated.
thanks,
dan

You need a copy of LaserCad. I have it. Sent me an email. [email protected]

I can help.