584,879 active members*
5,363 visitors online*
Register for free
Login
IndustryArena Forum > CAD Software > Rhino 3D > Give angle of exit or demoulding
Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2012
    Posts
    87

    Give angle of exit or demoulding

    Hello all, I want to give angle of departure of 14 degrees to the letters, I want to know how you can do? thanks you

  2. #2
    Join Date
    Dec 2003
    Posts
    1206

    Re: Give angle of exit or demoulding

    Are you intending to produce individual letters or cut letters into an object?The process is fairly similar in that you select the outline of the letters and use the extrude curve-draft feature to create the surfaces or solids you require and you will be prompted for the draft angle,which in your case will be 14 degrees.The depth will be positive or negative according to your needs as mentioned earlier.

Similar Threads

  1. Entry and Exit Marks
    By CYoung in forum Avid CNC
    Replies: 30
    Last Post: 11-29-2015, 01:28 AM
  2. Angle Iron Vs. Angle Aluminum for V Bearings
    By estes53 in forum Linear and Rotary Motion
    Replies: 1
    Last Post: 07-29-2015, 11:15 AM
  3. No Exit Moves After Finish!
    By Machineit in forum BobCad-Cam
    Replies: 20
    Last Post: 09-25-2012, 11:40 PM
  4. Exit Wounds and De-burring
    By aucran in forum MetalWork Discussion
    Replies: 3
    Last Post: 08-06-2010, 04:06 PM
  5. G70 exit commands with a -u.
    By rapidtraverse in forum Haas Lathes
    Replies: 35
    Last Post: 01-14-2008, 04:34 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •