Hello, I have a drawing for the part pictured below. I would like the width of the part extended from 0.75" to 1". I only need parts cut and bent I will do assembly, polishing and plating on my end. I would like to do 10-20 parts to start. I will provide drawings to people that PM me.
Results 1 to 6 of 6
-
05-17-2017, 04:41 PM #1
Registered
- Join Date
- Aug 2007
- Posts
- 21
RFQ Bent Sheet Metal part 10-20 pieces to start
-
05-18-2017, 08:32 PM #2
Registered
- Join Date
- Aug 2007
- Posts
- 21
Re: RFQ Bent Sheet Metal part 10-20 pieces to start
Still looking
-
05-19-2017, 10:33 PM #3
Registered
- Join Date
- Oct 2014
- Posts
- 2
Re: RFQ Bent Sheet Metal part 10-20 pieces to start
Im interested, sending PM.
-
05-22-2017, 09:21 PM #4
Registered
- Join Date
- Jun 2008
- Posts
- 6
Re: RFQ Bent Sheet Metal part 10-20 pieces to start
I'm interested if still available .
Thanks
-
05-25-2017, 12:44 AM #5
Registered
- Join Date
- Mar 2015
- Posts
- 178
RFQ Bent Sheet Metal part 10-20 pieces to start
I made a couple quick samples (just noticed need to make a few more this time with the end holes) and emailed you a quote.
-
05-30-2017, 12:03 AM #6
Registered
- Join Date
- Feb 2014
- Posts
- 92
Re: RFQ Bent Sheet Metal part 10-20 pieces to start
Hi to all,
We are intrested to provide quote. Can you let us know your email address so that we can communicate? We can be contacted through this email address [email protected]
BR
/SL Wong
Sales Manager
Proto Tree LLC
Website: Proto Tree
Email: [email protected]
Reply With QuoteSimilar Threads
-
how to unfold this sheet metal part
By lovely123 in forum SolidworksReplies: 1Last Post: 01-06-2016, 07:52 PM -
Wrapping a sheet metal part around another part with sketched bends?
By slow_rider in forum SolidworksReplies: 1Last Post: 05-17-2015, 08:37 PM -
here's an interesting one. sheet metal part
By kesparate in forum SolidworksReplies: 1Last Post: 08-01-2014, 11:28 PM -
sheet metal part problems
By chadwiggan in forum Uncategorised CAD DiscussionReplies: 0Last Post: 08-22-2010, 12:15 AM -
What is best for sheet metal part modeling?
By REVCAM_Bob in forum Uncategorised CAM DiscussionReplies: 4Last Post: 01-25-2008, 06:05 PM
Tags for this Thread
Posting Permissions
