I have an Hypertherm EdgePro system, touch screen job running Phoenix v9 software.
Problem is when I try to cut text from a DXF file it does not handle them at all well. Some parts will be mirror reversed and placed in a different part of the plate and so on.
For starters I know the controller doesn't recognise splines, so my text outlines have been exploded into polylines with unsatisfactory results. I have tried then, using the JOIN command in autocad to rejoin the poly lines but that fails also.
Does anyone have any experience with this issue, cutting text from an imported DXF?
Will the Hypertherm Phoenix software updates handle splines at all? I found out yesterday that there is an update available for my machine but it requires a new hard drive from Hypertherm (which they say in the upgrade notes is free, but my local agent in Australia wants $266 for it....go figure!)
I have spent a day and a half now walking back and forth to the machine trying every different variable I can think of from the CAD side of things, saving the files in every different release of autocad, I've tried splines to polylines, polylines at different resolutions, exploded, not exploded and every combination of the above until I am completely sick of it!
Ummm Help! :tired:
Thanks,
Richard.