584,817 active members*
4,802 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Cincinnati CNC > Acramatic 2100 x axis don't align
Results 1 to 2 of 2
  1. #1

    Acramatic 2100 x axis don't align

    Hi everybody, I have a problem with acramatic 2100. When I make procedure for align all axis they Machine make the alignment procedure, but at finish never align the axis, however all axis movement. I try disable only X axis, and the procedure for align successfull, then I try enable only X axis (y and z disabled) and never move the axis, when I use JOG mode X axis move on both directions. Acramatic 2100 never show errors and I don't know what is the problem.

  2. #2
    Join Date
    Oct 2016
    Posts
    106

    Re: Acramatic 2100 x axis don't align

    Hi. Maybe it's the switch under work table. Remove x guards , locate it, do align procedure , press that switch during alignment and see if machine goes other direction, or alarms overtravel ( there are 2 switches).


    Sent from my D5803 using Tapatalk

Similar Threads

  1. Arrow 500 Acramatic 2100 X AXIS TPA/HOME FAILURE
    By AGEMACHINERY in forum Cincinnati CNC
    Replies: 6
    Last Post: 12-05-2019, 08:47 PM
  2. Acramatic 2100 X axis Servo Error
    By Wildman05 in forum Cincinnati CNC
    Replies: 0
    Last Post: 03-28-2019, 01:31 PM
  3. acramatic 2100 - Z axis not ready overtravel limit
    By Madom in forum European Club House
    Replies: 0
    Last Post: 11-27-2017, 12:43 AM
  4. Replies: 0
    Last Post: 03-21-2011, 01:33 PM
  5. Axis command on Siemnes Acramatic 2100
    By kevinuk32 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 04-29-2009, 12:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •