Hi i have an axyz series 6010 router that i would like to be able to use mastercam on. Currently using tool path. Does anyone know what type of post processor i would need to be able to do this?
Hi i have an axyz series 6010 router that i would like to be able to use mastercam on. Currently using tool path. Does anyone know what type of post processor i would need to be able to do this?
Unfortunately, if you are using ToolPath, you are using an AMC controller in the table. That being said, ToolPath is the proprietary software that runs that table. An electronic retrofit would bring you to the A2MC which can be controlled by many different types of CAD/CAM softwares. This kit can be ordered (and installed) from AXYZ or you can try to undertake this adventure yourself and replace whats needed to be able to run say Mach 3 or something similar.