Originally Posted by
dneufell
Hello All! I have made a small open ended spline obout 3 inchs long.
When i print out the cad drawing it is about 3/4 scale.(about 2 inchs long) The scale in the lower right hand of the drawing says 1 ... I also drew a 2 inch square box and a 4 inch circle and they print out to size correctly.
what am i doing wrong? Thank you very much.....Dean
Have you looked at your printer settings?
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com