hi,
my cnc machine is engraving the arcs in steps, the arcs are in top to bottem, the programm is raster in x direction, earlier it was doing well, but the settings got disturb and now facing problems.
hi,
my cnc machine is engraving the arcs in steps, the arcs are in top to bottem, the programm is raster in x direction, earlier it was doing well, but the settings got disturb and now facing problems.
Sounds like maybe step over could be wrong with the cutter you are using, are u 3d engraving?
Sent from my Le X820 using Tapatalk