Good Day every body!
I try to remove the spindle cover and the left side cover screws are obstructed by the tool changer assembly, do I need to remove all of the tool changer assembly covers to access the screws for the head covers?
Thanks
Eric
Good Day every body!
I try to remove the spindle cover and the left side cover screws are obstructed by the tool changer assembly, do I need to remove all of the tool changer assembly covers to access the screws for the head covers?
Thanks
Eric
Move head down, clear of tool changer.
Andrew
Andrew Abken
www.drewtronics.net - PCB Cutters
Yes I try it but it reach the limit switch before.