TOP QUALITY 3KW WATER-COOLED MOTOR SPINDLE ENGRAVING MILL GRIND | eBay
Sorry about that.
There has been issues with cheap Chinese VFDs , so David recommends spending a bit more and going with the Hitachi . Apparently cheap ones may cause noise issues with the other electronics
https://www.driveswarehouse.com/wj200-022sf-2527
Now that I've bought a "cheap chinese vfd", I can say that I'd buy one again, at close to 1/3 the price of a Hitachi.
It's not perfect, and has fewer features, but it runs the spindle just fine.
All VFD's are noisy, and proper wiring and shielding is essential, regardless of brand.
My only recommendation is to only buy ones labeled as "Genuine Huanyang", and preferably from an Ebay seller that's been selling them for a long time. I bought mine from Solar Jean, who's been selling them for well over 5 years.
HUAN YANG 1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW VARIABLE FREQUENCY DRIVE INVERTER VFD | eBay
Offer them $130 and they'll knock a few bucks off the price.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I'm going to mount my vfd in a separate enclosure simular to what cncrp does , hopefully providing additional insurance . Each to his own of course.
Gerald I know you've got a lot of experience , so when the time comes ,I was going to build around what you recommend.
I just try and play it safe sometimes . Comes with being a hypochondriac
Gerald, I found the below ebay link for a spindle/vfd combo from Solar Jean. Although the description states the VFD is Huanyang, I cannot determine if the spindle is as well.
2.2KW WATER COOLED MOTOR SPINDLE & DRIVE INVERTER VFD 80MM DIAMETER WITH HY | eBay
Do you feel it is a good deal or would it be better/safer for me to purchase the Huanyang VFD only from your original ebay link HUAN YANG 1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW VARIABLE FREQUENCY DRIVE INVERTER VFD | eBay
and the Huanyang spindle from MajorTendonitis' link TOP QUALITY 3KW WATER-COOLED MOTOR SPINDLE ENGRAVING MILL GRIND | eBay
Huanyang doesn't make the spindles, and I think they come from a variety of sources. I bought the cheapest spindles I could find, and they seem to work fine.
If you want water cooled, I doubt you'll find a better deal than that one.
Not that major's link is to a 3Kw spindle, and I was talking about a 2.2Kw spindle. You need to make sure you get the appropriate sized VFD for the spindle you buy.
A 3kw spindle needs a 3Kw VFD.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Update: I have placed an order with Probotix for their Nebula model. I have also purchased their spindle/VFD combo, z-puck, dust boot, threaded insert table grid, and monitor/keyboard control arm.
After doing a bit more research, I feel this one will work best for me at this price point. I also greatly prefer the plug and play feature it offers. Len at Probotix has been very helpful throughout the process as well.
Very excited to get started with my first CNC. I'll post up some pics once it arrives in the next 2 - 3 weeks.
Thanks!