585,556 active members*
3,456 visitors online*
Register for free
Login

Thread: vaccume table and through cuts

Results 1 to 2 of 2
  1. 06-16-2017, 01:50 PM #1
    suspension
    suspension is offline Member
    Join Date
    Sep 2016
    Posts
    352

    vaccume table and through cuts

    How can I mill through the workspace without damaging vacuum table?
    Reply With Quote Reply With Quote
  2. 06-16-2017, 05:04 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538

    Re: vaccume table and through cuts

    You typically use a spoilboard on your table and the vacuum flows through the spoilboard. So you can cut slightly into the spoilboard.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Milling vise or vaccume table
    By suspension in forum Work Fixtures / Hold-Down Solutions
    Replies: 4
    Last Post: 06-17-2017, 01:40 AM
  2. Making cuts longer than my table
    By Granite in forum SheetCam
    Replies: 1
    Last Post: 12-10-2016, 07:41 PM
  3. Older Themwood C50 Cuts into Table
    By Ken_McD in forum Commercial CNC Wood Routers
    Replies: 7
    Last Post: 01-19-2011, 03:02 PM
  4. oil canning and chill markd or vaccume trap?
    By rwolf in forum Vacuum forming, Thermoforming etc
    Replies: 9
    Last Post: 07-16-2010, 10:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules