[omid_king]

Hi everyone,

this machine is one of my best projects that I have done ( of course in my eyes ). it took me almost six months because I had to do many things at the same time.
finally, it came out party well even more than I expected at that time. I will post a few photo from the beginning up to end.

please don't hesitate and let me know if you have any comment.

machine description:

body material: gray cast iron
X, Y, Z axis travel: 800*450*450
servo motor: Delta 1KW 10Nm
linear guide & ball screw: Hiwin
spindle motor: 5.5KW 4000 Rpm
tool holder: BT40
Controller: Mach3

casting and models
Attachment 365556Attachment 365558
Attachment 365562Attachment 365564
machining
Attachment 365568Attachment 365572
machined parts
Attachment 365574
Assembly
Attachment 365578Attachment 365582Attachment 365584Attachment 365586Attachment 365588Attachment 365590Attachment 365592Attachment 365594Attachment 365596Attachment 365598Attachment 365600Attachment 365602
Attachment 365604

and finally the first test

[AutomatedIngen]

Wow, this is an excellent build, I can't believe no one has commented on this yet. The resources alone required to build something even close to what you have created is a milestone.

Any updates on the build in regards to enclosure, ATC?

Any chance you have any CAD drawings of your design? I'd love to take a look at it in more detail, perhaps even utilize a design similar to yours with a build in epoxy granite.

[Jim Dawson]

That is really nice work.

[countryguy]

One of the best casting DIY CNC project I have ever seen! That is very nice work! I guess we missed this since it was from June when we were all working on Summer fun. :-)

[hesham morsy]

excellent project

[Alifuat]

Wonderful.healty your handa.. selamunaleykum

[ripperj]

Very impressive!


Sent from my iPhone using Tapatalk Pro