[kikitron]

HI to all,

I have electrical problems with my Amada LC 2415 A3. Yesterday worked ok and today I got alarm 2101.
It is possible to get wiring diagram for this laser machine because I dont have any documentation for it :/ ?

I dont have any power on safety relay OMRON G9S-321-T. Between A1 and A2 is 1ohm resistance and I think that there is a short-cut.
And on electronic fuses Q7/3 led is blinking and there is no +24V and between GND is 1ohm to :/

If there is a possible please share wiring diagram to me it Will help me allot.

Thanke you in advance for your helps.

[AMADAJOE]

HI to all,

I have electrical problems with my Amada LC 2415 A3. Yesterday worked ok and today I got alarm 2101.
It is possible to get wiring diagram for this laser machine because I dont have any documentation for it :/ ?

I dont have any power on safety relay OMRON G9S-321-T. Between A1 and A2 is 1ohm resistance and I think that there is a short-cut.
And on electronic fuses Q7/3 led is blinking and there is no +24V and between GND is 1ohm to :/

If there is a possible please share wiring diagram to me it Will help me allot.

Thanke you in advance for your helps.

2101 CIRCUIT PROTECTOR TRIP
A circuit protector in the electrical control unit has been tripped
due to an overload or short circuit in the 100 V AC or 24 V DC
circuit.
Email me I will send diagram
[email protected]