As price point between the 300 and 400 is the same, the UC300ETH-5LPT seems like the better choice and leaves me with plenty of unused I/O should I ever need it. Are CNC4PC and Automation Technologies the only North American sellers?
Thread: UC100 vs UC300ETH-5LPT
Results 21 to 25 of 25
-
08-15-2017, 06:33 PM #21
Registered
- Join Date
- Oct 2013
- Posts
- 30
Re: UC100 vs UC300ETH-5LPT
-
08-15-2017, 06:57 PM #22
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: UC100 vs UC300ETH-5LPT
I think so. I bought mine from CNC4PC.Are CNC4PC and Automation Technologies the only North American sellers?
Yeah, because the prices are nearly the same, I wouldn't normally recommend the UC400ETH, unless you are positive that you won't need the additional features.
One thing to note about the UC300ETH's 5 ports. Only two of them are "standard ports, like the UC400's ports. The other 3 use pins 2-9 as inputs only.Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-16-2017, 01:03 AM #23
Registered
- Join Date
- May 2014
- Posts
- 261
Re: UC100 vs UC300ETH-5LPT
ger21 have you received your UB1 yet?
If my post is missing an 'nt you might have to add it yourself.
-
08-16-2017, 01:36 AM #24
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: UC100 vs UC300ETH-5LPT
It's supposed to be here tomorrow.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
02-15-2020, 03:18 PM #25
Registered
- Join Date
- May 2014
- Posts
- 261
Re: UC100 vs UC300ETH-5LPT
About to pull the trigger on a UB-1 before I do is it still the latest and greatest BOB for the UC300ETH?
Originally Posted by ger21
If my post is missing an 'nt you might have to add it yourself.
Reply With QuoteSimilar Threads
-
Swap Mach 3/ESS for UCCNC/UC300ETH-5LPT on CRP PRO with Plug and Play Electronics
By skrap853 in forum Avid CNCReplies: 76Last Post: 03-27-2023, 11:26 PM -
UC300ETH not connecting
By Andrew22 in forum UCCNC Control SoftwareReplies: 14Last Post: 03-20-2018, 11:40 PM -
Mach3 plugin is now available for the UC300ETH
By A_Camera in forum UCCNC Control SoftwareReplies: 0Last Post: 11-11-2016, 09:45 AM -
What is the problem with cncdrive.com, the makers of UC300-5LPT USB motion controller
By A_Camera in forum UCCNC Control SoftwareReplies: 38Last Post: 12-06-2015, 08:13 AM -
UC300-5LPT issues
By niner_zero in forum UCCNC Control SoftwareReplies: 2Last Post: 08-19-2015, 09:27 PM
Tags for this Thread
Posting Permissions
