584,829 active members*
4,942 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2017
    Posts
    1

    Dynatorch SuperB XLS

    Hello!!

    Looking for help, new to the site which is great by the way! Me and my dad have a super b and recently as last thursday the machine has been acting up. Sputtering, Water, lost arc etc... We updated our software as sort of a last resort today and are now operating using the XLS. Since the initial download completed, the machine would not cut. Dynatorch CustomerSupport got us cutting (changed some settings) but it cuts upside down and backwards. So the only thing we know to do is in the converter, mirror the cut (flip it). even then that is only a solution to certain types of cuts as not all can just be flipped and be aesthetically correct. Our other problem is that our Home position has changed to the other side of the table, which we could most likely get used to, but only adds to the frustration at this point.

    We need help, we were down all day today and basically have been down for 4 days now. Any help is greatly appreciated.

    Alex

  2. #2

    Re: Dynatorch SuperB XLS

    Hi Alex,

    It was nice talking to you on Sunday.
    I will be happy to try and help with some of your issue. Let me know if you managed to get you dryer hooked up.

    Gary Wittlock

Similar Threads

  1. DYNATORCH 4 X4 XLS
    By CNCCajun in forum DynaTorch
    Replies: 3
    Last Post: 04-14-2014, 05:16 PM
  2. New 5 ft Dynatorch on its way!
    By ferometal in forum DynaTorch
    Replies: 3
    Last Post: 03-02-2011, 05:34 AM
  3. Here's what I do with my Dynatorch
    By RAW in forum DynaTorch
    Replies: 13
    Last Post: 06-16-2010, 12:50 PM
  4. Considering a Dynatorch..
    By acliffhay in forum DynaTorch
    Replies: 1
    Last Post: 11-17-2009, 01:45 AM
  5. new dynatorch
    By cstroke in forum DynaTorch
    Replies: 46
    Last Post: 02-09-2009, 06:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •