584,814 active members*
5,222 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Daewoo ACE-V30 operators manual ??
Results 1 to 8 of 8
  1. #1
    Join Date
    May 2014
    Posts
    36

    Daewoo ACE-V30 operators manual ??

    Hi Guys .
    I know this is a long shot but you never know .
    I just got myself a used Daewoo ACE-V30 machining centre with a Fanuc OM control .
    Its a 1990 model so yes fairly old .
    I didnt get any manuals with the machine though .
    So im wondering if anyone has manuals for the machine ?
    It has a table that rotates 180 degrees so im after the M codes etc etc that would control the table and the door opening and closing .
    Parameters are there so ill punch them to the pc sometime soon.

    Any manuals or wiring diagrams would be great .

    Thanks

  2. #2
    Join Date
    Feb 2013
    Posts
    788

    Re: Daewoo ACE-V30 operators manual ??

    If you can provide the Serial Number of the machine, from the placard on the electrical door (with that age machine it was either outside, or inside)

    Doosan has most manuals still available, for Doosan, Daewoo, and Mechatech machines.

    Most of them are less than 100 dollars (US) each...(around 300 for the entire set that shipped with the machine. (Safety, Instruction, Operation, Parts, and Electrical)

    Note: These are not FANUC Manuals. (You would get those from Fanuc)
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  3. #3
    Join Date
    May 2014
    Posts
    36

    Re: Daewoo ACE-V30 operators manual ??

    Hi dhardt .
    Attachment 367884

    Attached is a picture of the name plate etc etc .
    Our local Daewoo/Doosan agent has told me that there isnt anything available for this machine .
    Serial number : 410091
    Year : 1990 .
    Im familiar with the fanuc side of the machine so that wont be too much of an issue .

    Thanks

  4. #4
    Join Date
    Feb 2013
    Posts
    788

    Re: Daewoo ACE-V30 operators manual ??

    Checking.
    Likely, answer by tomorrow..
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  5. #5
    Join Date
    May 2014
    Posts
    36

    Re: Daewoo ACE-V30 operators manual ??

    Thank you . Much appreciated .

  6. #6
    Join Date
    Feb 2013
    Posts
    788

    Re: Daewoo ACE-V30 operators manual ??

    My apologies for getting your hopes up...
    Per our parts department: "It is too old, factory only have 2 manuals in CSTIP, Electrical and parts and they aren’t even sure they would match this machine s/n."

    Sorry, normally we have them...some items fall through the cracks, unfortunately.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  7. #7
    Join Date
    May 2014
    Posts
    36

    Re: Daewoo ACE-V30 operators manual ??

    Thanks for trying anyway .
    I appreciate it !!

  8. #8
    Join Date
    Nov 2017
    Posts
    1

    Daewoo ACE V30 user manual

    Quote Originally Posted by Shottie_gp View Post
    Hi Guys .
    I know this is a long shot but you never know .
    I just got myself a used Daewoo ACE-V30 machining centre with a Fanuc OM control .
    Its a 1990 model so yes fairly old .
    I didnt get any manuals with the machine though .
    So im wondering if anyone has manuals for the machine ?
    It has a table that rotates 180 degrees so im after the M codes etc etc that would control the table and the door opening and closing .
    Parameters are there so ill punch them to the pc sometime soon.

    Any manuals or wiring diagrams would be great .

    Thanks
    Hi; still looking for the manual?, is big, so please let me know what part you are interested in.

Similar Threads

  1. Required Electrical Circuit Manual for Daewoo DMV 400 or Daewoo Ace 400 VMC
    By vikrmmehta in forum Machinery Manuals / Brochures
    Replies: 0
    Last Post: 06-16-2017, 07:49 AM
  2. Replies: 0
    Last Post: 03-18-2016, 10:55 PM
  3. m32 operators manual
    By cowboysam777 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 01-22-2016, 01:23 PM
  4. YAM CK-2 operators manual
    By L98FIERO in forum Machinery Manuals / Brochures
    Replies: 0
    Last Post: 03-17-2012, 04:54 PM
  5. 15m operators manual
    By orbj32 in forum Fanuc
    Replies: 1
    Last Post: 11-28-2010, 04:24 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •