Hello,
I import a stl file but the quality is very low. If I cut and import a piece from the stl file it gets better quality. 140 cm x 60 cm stl file on the right. 30 x 30 cm on the left. Why is this happening?
Thank you
Hello,
I import a stl file but the quality is very low. If I cut and import a piece from the stl file it gets better quality. 140 cm x 60 cm stl file on the right. 30 x 30 cm on the left. Why is this happening?
Thank you
Because Aspire has a fixed, limited resolution, the larger the model is, the poorer the resolution will be.
Make sure you use the highest resolution, by holding the Shift key when you start a new job, which gives you two higher resolution options.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I am sure "Very High (7 x Slower)" And toolpath prewiev is Maximum. It makes sense that you first said. Thank you
Very high is not the highest.
There's also:
Extremely High (20x Slower)
and
Maximum (50x Slower).
To get these, you need to hold the Shift key when you click on the "New File" icon.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)