[Cush]

Im trying to configure another PC to mirror the xilog plus setup at work but not having much success.

When I open a program that has successfully ran on the original set up on the new PC it seems to be off scale and shows part of the model on each side of the screen please see attached images. Does anyone know whats happening I have restored the configuration files from the original xilog setup?

[dmitry83]

You should copy cfg folder from original pc to your pc

[Cush]

Hi dmitry83,

I have done this but I get error "magazine not compatible with electric spindle (T=101)" This is when I open a program that runs fine on the original setup.

[dmitry83]

Hi dmitry83,

I have done this but I get error "magazine not compatible with electric spindle (T=101)" This is when I open a program that runs fine on the original setup.

Make sure you have same version of xilog. Normaly if you copy complete folder of xilog plus, should work. Try to copy axis.ini from bin folder and def.tlg from job folder.
And if you have win7+ you must open privacy setting for this folder.

[Cush]

Thank you I will give that a try

[Service SCM BR]

Hi, verify in the menu Help the versions of Xilog and type of macchine.
Because your machinery is Tech and you installed how Record the Xilog no run correctly