584,327 active members*
6,626 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > PTC Pro/Manufacture > G-Post for Integrex 1060
Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2007
    Posts
    3

    G-Post for Integrex 1060

    I am not able to configure in the right way the G-post for Mazak Integrex 1060.
    Could someone tell me if it is available a download site to get one copy of it??
    I would use it under Pro/Wildfire 2.0 or 3.0.

    Thanks in advance
    Massud

  2. #2
    Join Date
    Feb 2007
    Posts
    21

    Talking

    i am not aware of any free posts out there, but if you find one i would like to know too.

  3. #3
    Join Date
    Apr 2007
    Posts
    36
    If you have a active maintenance agreement with PTC you can download a few free Postprocessors from their websites here: http://www.ptc.com/cs/cs_23/howto/ncgp4903/ncgp4903.htm
    Requires a password though.

    Theese are often more easy to modify rather than writing one from scratch.
    Other than that I think you will have to pay up to get one custom made, if you dont find a kind sould that has the same setup as you.

    Best regards, Jonas

  4. #4
    Join Date
    Dec 2009
    Posts
    1

    AlphaCam 7 post processor file for Mazak 1060 (ETower)

    Also need post processor file for Mazak 1060 and Alphacam v7

    Anybody have this file please?

    Thanks in advance.

Similar Threads

  1. Mazak Integrex 200 III St ISO/EIA
    By maramb in forum Mazak, Mitsubishi, Mazatrol
    Replies: 19
    Last Post: 11-28-2007, 09:41 PM
  2. Integrex IV help
    By Demon440 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 8
    Last Post: 02-19-2007, 08:21 PM
  3. integrex 50 YB ISO Programming
    By Batman in forum G-Code Programing
    Replies: 3
    Last Post: 12-13-2006, 12:47 AM
  4. num 1060 or the like
    By sc_crasher in forum Fanuc
    Replies: 3
    Last Post: 01-12-2006, 02:11 AM
  5. Procam Ii Post For Mazak Integrex
    By BROCD in forum Uncategorised CAM Discussion
    Replies: 9
    Last Post: 02-17-2004, 06:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •