584,802 active members*
4,917 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > BobCad-Cam > Tutorials > Can't move geomitry around to select it.
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2014
    Posts
    5

    Can't move geomitry around to select it.

    Hello, I am new and have drawn my part. Just when I am selecting the geometry, I need move the part to select more geometry. I can soom in and out but not move it left or right. Sorry I am not so good at this and would and would appreciate and help.


    Thank you all so very much

  2. #2
    Join Date
    Mar 2014
    Posts
    5

    Re: Can't move geomitry around to select it.

    I want anyone who had this same problem if yoy look at the tool bar there is a cross with arrows on it that is the move all the display and part around to be able to select other geometry.

    Thank you.

  3. #3
    Join Date
    Jun 2008
    Posts
    1838

    Re: Can't move geomitry around to select it.

    If you hold the "Ctrl" key down on your keyboard the middle scroll wheel on the mouse will also put you in the "Pan" mode (Cross Icon)

Similar Threads

  1. Replies: 0
    Last Post: 03-12-2016, 08:30 AM
  2. Replies: 2
    Last Post: 11-11-2015, 01:55 PM
  3. move to saved location or move a fixed distance
    By BikeCourse in forum Mach Mill
    Replies: 0
    Last Post: 03-21-2015, 03:06 AM
  4. plunge after first move and retract after last move
    By Joesph Jackman in forum Mastercam
    Replies: 9
    Last Post: 02-24-2012, 06:15 AM
  5. Replies: 6
    Last Post: 03-14-2011, 09:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •