Having been put right on the UHU servo controller, I need a cheap-ish means of converting step/dir pulses to +/-10 to control some analogue AC servo drives.
Any suggestions?
Thanks David
Results 1 to 9 of 9
Threaded View
-
08-15-2017, 01:51 PM #1
Registered
- Join Date
- Sep 2016
- Posts
- 31
Step/direction to analogue converter
Reply With QuoteSimilar Threads
-
LinuxCnc "Step Time" "Step Space" "Direction Hold" "Direction Setup" values??
By blau_schuh in forum Dmm TechnologyReplies: 5Last Post: 01-12-2014, 07:07 PM -
Tranlate puls/dir control signals to Step Time, Step Space, Direction Hold (LinuxCNC)
By jandan in forum CNC Machine Related ElectronicsReplies: 4Last Post: 09-10-2013, 04:52 AM -
Step/Direction pins should be Step FWD and Step BACK
By rayscott in forum Mach Software (ArtSoft software)Replies: 6Last Post: 02-10-2010, 12:57 AM -
step/direction to +/- 10v (analog)converter
By krummigudna in forum Mach Software (ArtSoft software)Replies: 12Last Post: 10-14-2009, 03:41 PM -
PWM&direction into voltage converter
By visky in forum Want To Buy...Need help!Replies: 0Last Post: 04-05-2009, 05:47 PM
Tags for this Thread
Posting Permissions
